Kindergarten artificial turf laying process and matters needing attention

Is kindergarten lawn laying complicated?

The laying of artificial turf is actually very easy. Simply put, it is flattening, size cuts, and a sticky edge.

When laying on the flat bottom, the back of the lawn does not need to be integrally bonded. The brand lawn itself has good flatness retention and overall strength, as long as the joints of the two lawns are glued to the backside provided by the manufacturer. .

At the periphery of the entire site, if the top wall of the lawn does not need to be glued, such as lawn and open space are connected, the back edge of the lawn needs to be glued directly to the ground in order to prevent frequent kicking and kicking and tripping. Stairs, walls and flower beds and other complex parts need to be fully glued to the back of the lawn. Tools only need brushes, paper cutters, and water scoops. Glue can be directly used for decoration of the barrels of omnipotent glue, building materials stores are generally sold.

Kindergarten artificial turf laying on the ground what are the requirements?

The laying of kindergarten artificial turf has very low requirements for the foundation ground, and it only needs to be hardened and leveled.

New kindergartens need to compact the soil base and use cement or concrete as a cover and leveling, as long as the foundation does not collapse and the cement surface has a slight drainage gradient, which is the same as the general cement floor requirements. The updated garden was originally made of terrazzo and tile, as long as the overall leveling was ensured, the bricks were not loosened, and the lawn could be laid directly without hard edges and corners.

If the site is originally a plastics site, it can be laid directly as long as it is entirely flat. However, taking into account the non-environmental factors of plastics, it is better to eradicate the plastics within three years and to cover them with cement. Sandy soil and soil slopes can also be directly paved. However, when it rains, muddy water can easily seep through the exhaust holes of the lawn, which is not conducive to cleaning.

Several details of the kindergarten lawn in need of attention

1. After the artificial turf arrives on the field, do not rush to cut the grass. Spread the lawns completely and leave them for at least 24 hours to allow them to fully release the stress generated during the production and transportation of the artificial turf and allow the lawn to adapt to the new environment's thermal expansion and contraction. Paved joints are too large.

2, in the cutting of artificial turf, do not pursue a knife cut, it is best to slightly cut a little larger, and then a little bit on the side and trimming, so as not to inadvertently after the small gap. Slow work can only work fine.

3, when cutting artificial turf, the lawn will be turned up and cut from the back of the knife will be easier.

4, when brushing, be careful not to apply glue on the straw, otherwise the seam will be more obvious.

5. The glue between the seam tape and the cement floor is not glued, and the glue is saved. At the same time, the suspended state of the lawn is conducive to the drainage and the displacement generated by the thermal expansion and contraction in use.

6, when cutting, to ensure that the whole site of the grass lay the same direction, otherwise there will be a significant color difference.